CCS™ Coatings
Industrial Use High Solids (O VOC) Coatings for Concrete Protection (High Acid Resistance)
CCS™ Coatings
ChemCo Systems concrete coatings are intended primarily for industrial applications as protection from corrosive acids, alkalies and solvents as well as fuels, oils and greases. All of our coatings are 100% solids, are not flammable, have very low shrinkage, contain no solvents or water, and have 0 VOCs so they can be used almost anywhere. Most are capable of being installed on damp substrates and we even make a couple of underwater coatings for fresh or salt water.
Contact UsProducts
CCS™ Coating, AC-1 for Asphalt
Chemical Resistant Epoxy Coating for Asphalt Pavement
CCS™ Coating, Concentrated Sulfuric Acid Resistance Coating and Surfacing(CSA)
CCS™ Coating, Epoxy Healer Sealer
Ultra Low Viscosity Epoxy Penetrant for Topical Applications
CCS™ Coating, FC
Epoxy Coating for Direct Food Contact (Dry Bulk and Aqueous)
CCS™ Coating, General Purpose
Epoxy Coating for Common Industrial Chemicals
CCS™ Coating, High Build Marine Structures
Epoxy Coating for Concrete and Steel Marine Applications
CCS™ Coating, High Chemical Resistance
Epoxy Coating for Strong Industrial Chemicals
CCS™ Coating, High Temp
High HDT Epoxy Coating for Strong Industrial Chemicals
CCS™ Coating, Marine Structures
Epoxy Coating for Concrete and Steel Marine Applications
CCS™ Coating, MVR Primer
For Slab on Grade Concrete With High Moisture Vapor Transmission
CCS™ Coating, Polyurea Membrane
Elastomeric Polyurea Membrane for Waterproof Surfacings
CCS™ QuikPrime
Coating – Structural Epoxy Adhesive Primer for Polymer Coating & Flooring Systems
CCS™ Coating, Utility
Flexible Epoxy Coating for Economical Surfacings
CCS™ Coating, Utility LV
Flexible Epoxy Coating for Economical Surfacings
