CCS™ QuikPrime™

Coating – Structural Epoxy Adhesive Primer for Polymer Coating & Flooring Systems

Description

CCS™ QuikPrime™ is a 2:1 mix ratio, two-component, solvent-free, low viscosity, structural epoxy adhesive primer designed to prime properly prepared concrete or steel. It is one of the few primers that meets ASTM C881, Type IV, Class B and Class C. It can be applied over fresh concrete (24 hours after placement 73°F (23°C), hardened concrete, and steel. It is an ideal primer for polymer products, such as: epoxies, polyaspartics, polyureas, and polyurethanes. It can be applied over properly prepared concrete substrates that are dry, damp, wet, and free of standing water. Applications include priming properly prepared concrete and steel substrates when rebuilding damaged joint nosing, repairing spalled and deteriorated concrete, and sealing non-structural cracks in concrete. CCS™ QuikPrime™ can also be used as a prime coat in green concrete provided that the substrate can tolerate a negative side vapor barrier early in its cure cycle. The product’s short cure cycle, tolerance of surface dampness, low viscosity, excellent adhesion in cold weather, and high bond strength to properly prepared surfaces make it ideally suited as a multipurpose primer. It contains no VOC’s (volatile organic compounds).

  • Meets - ASTM C881, Type I, II, IV and V, Grade 2, Class B and C and AASTHO M235, Type I, II, IV and V, Grade 2, Class B and C.

Features


CCS™ QuikPrime™ is specifically formulated as a primer for bonding epoxies, polyaspartics, polyureas, and polyurethanes to dry, damp, and wet and concrete substrates that are free of standing water and steel substrates.

  • Bonds to dry and damp substrates
  • High chemical resistance.
  • Environmentally safe no VOC’s.

Technical Data Sheet