Kemko® 064 HB
Grouts - Control Joint Filler And Embedded Wire And Can Light Sealer
Description
KEMKO® 064 HB, Control Joint Filler and Embedded Wire and Light Can Sealant is a 1:1 ratio, two- component, fast curing, semirigid, epoxy control joint filler, and wire slot filler, and traffic loop sealant with high viscosity for controlled flow. For high volume jobs, it is designed to be placed KIP™ (KEMKO® Injection Process) System automatic meter, mix, and dispensing Model C Slot Pump or equal. It is designed to meet FAA P-606 for the embedment in concrete and asphalt of wires and steel light cans in runways and tarmacs exterior pavements. It reinforces properly prepared exterior and interior pavement control joint and saw edges because of its energy absorbing properties. It has excellent resistance to impact, deicing chemical, and most aircraft, automotive, and forklift vehicles’ chemicals. No SiO2 (silica sand fillers are used as a low-cost filler or to control viscosity) is used in the manufacturing of KEMKO® 028. It contains no VOC’s (volatile organic compounds).
- Meets FAA P-606-1.1 Suitable for sealing electrical embedded wires in saw cuts and for sealing light fixtures in concrete and asphalt pavement.
- Meets ACI 302.1R 3.2.1 Joints in floor areas subject to the hard wheels of material handling vehicle traffic should be filled with a semirigid filler to minimize wear.
Features
KEMKO® 064 HB Control Joint Filler and Embedded Wire and Light Can Sealant unlike many other control-joint and saw cut fillers, KEMKO® 064 HB exhibits excellent resistance to water, aqueous salt solutions, most aircraft, automotive, and forklift fluids.
- Meets ACI 302.1R 3.2.1 semi-rigid joint filler.
- Does not embrittle when exposed to sunlight for long periods of time.
- Is inert and environmentally safe upon cure.
- Environmentally safe no VOC’s