ASTM C881 Products

CCS Epoxies for ASTM C 881, Types I, II, III, IV, V, VI and VII, Grades 1,2 and 3

CCS Epoxy Adhesive Cross Reference Chart for ASTM C881 Types

Type* Use Grade 1 Grade 2 Grade 3
I Non-load Hard-hard CCS IR Grout Std, Hi Ambient, Lo Viscosity, Slump Pumping, Hi Temp, Hi Ambient Temp, Underwater CCS Bonder Liquid LWL and SWL CCS Bonder Paste LWL and SWL
II Non-load Fresh-hard CCS Grout IR Low Exotherm Bonder Liquid LWL and SWL Bonder Paste LWL and SWL
III Skid resist. mtl. to hard CCS Bonder Patch, Nosing, Slurry Binder, Bridge Deck Lo Mod Bonder Paste
IV Load Hard-hard CCS IR Grout Std, Hi Ambient, Lo Viscosity, Slump Pumping, Hi Temp, Hi Ambient Temp, Underwater Bonder Liquid LWL and SWL Bonder Paste LWL and SWL
V Load Fresh-Hard CCS IR Grout Std, Hi Ambient, Lo Viscosity, Slump Pumping, Hi Temp, Hi Ambient Temp, Underwater Bonder Liquid LWL and SWL Bonder Paste LWL and SWL
VI Load Segmental precast N/A N/A Dowel/Rebar/Grout SWL and LWL
VII Non-load Segmental precast N/A N/A Dowel/Rebar/Grout SWL and LWL

ASTM C881 Type Definitions

Type I — For use in non-load bearing applications for bonding hardened concrete to hardened concrete and other materials, and as a binder in epoxy mortars or epoxy c

Type II — For use in non-load bearing applications for bonding freshly mixed concrete to hardened concrete (new concrete overlays to existing concrete).

Type III — For use in bonding skid resistant materials to hardened concrete, and as a binder in epoxy mortars or epoxy concretes used on traffic bearing surfaces (or surfaces subject to thermal or mechanical movements).

Type IV — For use in load-bearing applications for bonding hardened concrete to hardened concrete and other materials and as a binder for epoxy mortars and concretes. This structural load bearing category is considered to be a technical equivalent to AASHTO M 235.

Type V — For use in load-bearing applications for bonding freshly mixed concrete to hardened concrete.

Type VI — For bonding and sealing segmental precast elements with internal tendons and for span-by-span erection when temporary post tensioning is applied

Type VII — For use as a non-stress carrying sealer for segmental precast elements when temporary post tension is not applied as in span-by-span erection.

ASTM C881 Grade Definitions

Grade 1 — Low Viscosity

Grade 2 — Medium Viscosity

Grade 3 — Non-Sag Viscosity

For additional background on applications, see the links Surface Preparation and Old-to-New Bonding

Tell us about your project

CALL 650-261-3790.