ChemCo Systems - The experienced leader in concrete repair
PRODUCTS SERVICES EQUIPMENT & PARTS WHAT'S NEW COMPANY CONTACT

Featured Products


Structural Concrete Crack Repair

SITE SEARCH
CCS Bonders
CCS Injection
CCS Grouts
CCS Coatings
CCS Binders
Coating and Crack Quantity Calculator
Product Spec Template



Projects
Tech Links
- FAQ's
> Structural Concrete Repair
- Crack Injection Specification
- Surface Preparation
- Bonding Old-to-New Concrete
- Intro to Construction Polymers
- Plate Bonding
- Coating Guide

Most engineering authorities agree that it is the very nature of concrete structures to crack to a minor or major degree. Cracking indicates that the structure has been forced to absorb the energy of some form of stress.

Concrete cracking is caused by:

> Shrinkage during cure, before the concrete has developed its full strength.
> Mechanical overload, either static or dynamic.
> Temperature changes in a structure where no provision was made for movement or controlled cracking.
> Base or foundation settlement.
> Overworking or excess watering of the surface.

concrete column repair Cracks can be repaired

However, when a concrete structure has cracked for any of those basic reasons, it does not necessarily mean that the structure has failed. On the contrary, any cracked concrete structure can be repaired effectively and most often permanently, provided the structure has not been wholly deformed and the original cause of cracking has stopped.

KIP—Kemko Injection Process

This is a proprietary method of epoxy injection fissures down to 0.002 inches wide for their full depth with a high strength epoxy resin adhesive. All of the speciality contractors practicing this method have been trained at ChemCo Systems. When the injected adhesive cures, it seals the crack entirely and also restores the concrete to its original monolithic condition. Injecting repairable cracks in concrete will:

> Restore structural and/or design strength to the cracked concrete structure,
> Eliminate serious spalling of concrete initiated by cracking and aggravated by freeze thaw cycling,
> Prevent corrosion of reinforcing steel and pre-stress tendons by encapsulating them against moisture or water contact.
> Stop the leakage of water and fluids through concrete structures.
> Repair concrete architecturally without any of the unsightly surface marks caused by standard surface crack repairs.

How crack injection works

A temporary seal is applied to the crack face and entry ports are placed in the seal along the crack plane. If the crack extends entirely through the concrete, the back side is also sealed to prevent adhesive run out.

Two electronically controlled coupled metering pumps drive the two components (resin and hardener) of a fast-setting epoxy adhesive to a special mixing head. The adhesive is mixed at the nozzle and injected through a special gasket that prevents leakage on the face of the concrete.

QC for crack repair
   Impact echo testing to verify crack repair
The adhesive is pumped into the first entry port until it begins to show at the next adjacent port. The operator knows that the adhesive has reached the full depth of the concrete member when the adhesive oozes out of the next port.

The first injected port is then plugged and injection is resumed at the second port. This procedure is followed until the entire crack or void in the concrete is filled. The procedure is similiar on horizontal or vertical surfaces. On vertical members the first port injected is usually the lowest and injection progresses upward. Injection pressures range from 2 p.s.i. to 300 p.s.i. and are controlled by the operator.

After the epoxy adhesive has cured, the temporary surface seal is removed, leaving the face of the concrete smooth and unmarred except for the faint trace outline of the crack. Sacking or painting usually will hide the injected cracks completely.

ChemCo Systems offers the system on a contractual service basis through KIP licensed applicators throughout the U.S., Canada and several international locations. This extensive network of licensees ensures a quality project each time.

For earthquake damage

epoxy bonding of concrete repair overlay Nothing more typifies the maximum effectiveness of the KIP system than the role it has played in restoring concrete structures damaged by earthquakes. Without the high strength, economical repairs made possible only by epoxy injection, scores of buildings in the U.S., Asia, Europe, Middle East and Central America would have been scrapped and rebuilt.

For underwater repair

In 1976, our technical staff began developing an injection system that could be effectively employed for the repair of submerged concrete structures. After several years of product engineering and field evaluation, this development has greatly increased the scope of the KIP System, making it even more versatile and effective for restoring concrete structures in a variety of service demands throughout the world.


underwater epoxy bonding
Offering the highest quality concrete crack repair injection low viscosity epoxy adhesives (and pastes or gels) for over 60 years.
Top of page

CCS PRODUCTS  |  KEMKO APPLICATORS  |  EPOXY ASPHALT  |  SERVICES  |  EQUIPMENT & PARTS  |  WHAT'S NEW  |  COMPANY  |  CONTACT  |  HOME
Toll Free: 800.757.6773   Tel: 650.261.3790   Email: email@chemcosystems.com