ChemCo Systems - The experienced leader in concrete repair epoxy mortar
PRODUCTS SERVICES EQUIPMENT & PARTS WHAT'S NEW COMPANY CONTACT

CCS Products


Featured Products

CCS Epoxies for ASTM C 881, types I, II, III, IV, V, VI and VII

SITE SEARCH
CCS Bonders
CCS Injection
CCS Grouts
CCS Coatings
> CCS Binders
Coating and Crack Quantity Calculator
Product Spec Template


Product Data/MSDS



Projects
Tech Links
- FAQ's
- Structural Concrete Repair
- Crack Injection Specification
- Crack Injection Basics for Concrete Crack Repair(NEW)
- Surface Preparation
- Bonding Old-to-New Concrete
- Intro to Construction Polymers
- Plate Bonding
- Coating Guide
- CCS Product Equivalents

CCS Epoxy Adhesive cross reference chart for ASTM C881 Types

Type* Use Grade 1 Grade 2 Grade 3
I Non-load
Hard-hard
CCS IR Grout Std, Hi Ambient, Lo Viscosity, Slump Pumping, Hi Temp, Hi Ambient Temp, Underwater CCS Bonder Liquid LWL and SWL CCS Bonder Paste LWL and SWL
II Non-load
Fresh-hard
Low Exotherm Bonder Liquid LWL and SWL Bonder Paste LWL and SWL
III Skid resist. mtl. to hard Bonder,Patch, Nosing and Binder, Bridge Deck Lo Mod Bonder Paste
IV Load
Hard-hard
IR Grout Std, Hi Ambient, Lo Viscosity, Slump Pumping, Hi Temp, Hi Ambient Temp, Underwater Bonder Liquid LWL and SWL Bonder Paste LWL and SWL
V Load Fresh-Hard IR Grout Std, Hi Ambient, Lo Viscosity, Slump Pumping, Hi Temp, Hi Ambient Temp, Underwater Bonder Liquid LWL and SWL Bonder Paste LWL and SWL
VI Load
Segmental precast
N/a N/a Dowel/Rebar/Grout SWL and LWL
VII Non-load
Segmental precast
N/a N/a Dowel/Rebar/Grout SWL and LWL

*ASTM C881 Type Definitions

Type I — For use in non-load bearing applications for bonding hardened concrete to hardened concrete and other materials, and as a binder in epoxy mortars or epoxy concretes.

Type II — For use in non-load bearing applications for bonding freshly mixed concrete to hardened concrete (new concrete overlays to existing concrete).

Type III — For use in bonding skid resistant materials to hardened concrete, and as a binder in epoxy mortars or epoxy concretes used on traffic bearing surfaces (or surfaces subject to thermal or mechanical movements).

Type IV — For use in load-bearing applications for bonding hardened concrete to hardened concrete and other materials and as a binder for epoxy mortars and concretes. This category is considered to be a technical equivalent to AASHTO M 235.

Type V — For use in load-bearing applications for bonding freshly mixed concrete to hardened concrete.

Type VI — For bonding and sealing segmental precast elements with internal tendons and for span-by-span erection when temporary post tensioning is applied.

Type VII — For use as a non-stress carrying sealer for segmental precast elements when temporary post tension is not applied as in span-by-span erection.

*ASTM C881 Grade Definitions

Grade 1 — Low viscosity
Grade 2 — Medium viscosity
Grade 3 — Non-sag viscosity

For additional background, see the links "Surface Preparation" and "Old-to-New Bonding" in the shaded area left side of this page.


Top of page

 

CCS PRODUCTS  |  KEMKO APPLICATORS  |  EPOXY ASPHALT  |  SERVICES  |  EQUIPMENT & PARTS  |  WHAT'S NEW  |  COMPANY  |  CONTACT  |  HOME
Toll Free: 800.757.6773   Tel: 650.261.3790   Email: email@chemcosystems.com